Skip to main content
AITHA IoT Core · Engineering and integration

Production hardware base: connectivity, location and OTA with rollback

Multi-network connectivity with failover, GNSS, sensors and IMU, field buses and A/B OTA updates with rollback. Publish to AITHANEX or to your own backend.

Connectivity

InterfaceSpecificationAvailability
LTE Cat-1SIMCom A767xx family. Dynamic APN configuration.Standard
Wi-FiIEEE 802.11 b/g/n. Automatic reconnection and RSSI monitoring.Standard
Bluetooth Low EnergyFor configuration and remote control.Deployment-dependent
EthernetW5500 SPI, Fast Ethernet 100 Mbps. Autonegotiation, DHCP and link detection.Optional
FailoverAutomatic switching between mobile network, Wi-Fi, and Ethernet.When the interface is available

GNSS and location

Constellations

  • GPS, GLONASS, Galileo, and BeiDou (depending on hardware version).
  • Continuous tracking according to configuration.
  • Last valid position persistence.
  • Configurable movement detection.

Sensors and inputs/outputs

ParameterDetailNotes
IMUIntegrated accelerometer + gyroscope.Detection of impact, vibration, movement, rotation, lifting, and tampering.
Digital inputsConfigurable.Standard
Analog inputsOptional
Digital outputsStandard
RelaySecure relay with protected control.Standard

Protocols and updates

Protocol / FunctionDetail
MQTT, HTTP, HTTPS, API RESTCommunication with the platform and cloud services.
Modbus RTU/TCPIntegration with industrial equipment.
CAN BusFieldbus.
RS485Serial bus.
OTA (A/B scheme)Automatic rollback. System and critical services watchdog. Local persistence in NVS.

Power Supply

ParameterValueNotes
Nominal voltage12 V
Input range7–60 VDCRequires the corresponding power supply accessory.

Known limitations

Ethernet is not standard

  • The Ethernet interface (W5500) is optional and is not included in every hardware version.
  • Failover to Ethernet only operates when the module is installed.

Optional analog inputs

  • Analog inputs are not available in every configuration.
  • They must be enabled in the corresponding hardware version.

GNSS depends on version

  • Constellation support (GPS, GLONASS, Galileo, BeiDou) depends on the hardware version.
  • Not every constellation is active in every variant.

BLE depends on deployment

  • The use of Bluetooth Low Energy for remote control depends on the deployment configuration.
  • It is not enabled by default in every project.

Validate your product architecture

Review connectivity, protocols, and integration architecture with our specialists.